Views:2 Author:Site Editor Publish Time: 2020-03-27 Origin:Site
How to extend the life of the filling machine? I believe this is an issue that every filling machine customer is eager to understand. When we usually fill a machine, for example, the original service life of the filling machine is ten years. As a result, we usually cannot do the machine itself. To regular maintenance, etc., will cause the life of the filling machine to be reduced to eight years or even less. This has caused us huge economic losses and brought a lot of inconvenience to our work. Let ’s take a look at how to extend the life of a filling machine in Wuhan Dongtai.
First of all, before operating the filling machine, we must clearly understand the instructions of the filling machine, read the instructions first, and then say that we are familiar with the adjustment and use of the filling machine. When operating, we must strictly follow the instructions of the filling machine. To operate according to the instructions, pay attention to the details, and the details must determine the success or failure.
Secondly, the machine is regularly repaired and maintained according to the instructions, and the body of the filling machine is wiped with oil, so that the body of the filling machine is protected by an oil layer as much as possible. Good protection of the body of the filling machine, which is also a way to extend the life of the filling machine.
Thirdly, we must also pay attention to the cleaning of the sealing cloth of the hot press stand, and do not leave foreign matter on it, to ensure that the filling machine is as clean as possible, and to avoid the material left for a long time to cause corrosion to the inlet.
Fourth, we must constantly check the machine to see if the contacts in various parts of the machine are good. It is necessary to ensure safe electricity use and prevent injuries caused by incorrect electricity use.
Fifth, when a fault is found, we must turn off the power in time, press the emergency stop button when necessary, lift the cover after deflation, then close the voltage, check the cause, and eliminate the fault.
Sixth, during the use of the linear filling machine, some small problems are inevitable. When there are problems with the filling machine, we should not just think about it ourselves. We must find after-sales service and find a filling machine. Professional service team to repair our filling machines.