Views:0 Author:Site Editor Publish Time: 2021-01-04 Origin:Site
The automatic aerosol filling machine is a machine and equipment for the production of aerosols. Aerosols are more common in life. Common sunscreen sprays, medical sprays, mosquitoes, etc., are all aerosols. . The automatic aerosol filling machine is a filling equipment for the production of aerosols. The automatic aerosol filling machine provided by Fengquan has the advantages of excellent performance, convenient operation and stable use.
The automatic aerosol filling machine consists of three parts: filling machine, sealing machine and inflator. The equipment is powered by an air compressor and does not require electricity.
1. Adjust the air pressure of the main engine.
Open the hand slide valve in front of the air source, pull up the pressure regulating knob on the air source, and rotate it clockwise to increase the pressure. Rotate counterclockwise, the pressure drops. Adjust to the required pressure (normally to 0.6-0.7MPa), press the pressure regulating knob to lock it.
2. Adjust the sealing diameter and sealing depth
Turn on the hand slide valve in front of the air source of the main engine and the sealing knob switch on the panel, take a valve and press it in the sealing head with your fingers, step on the foot valve, take out the valve, and measure the outer diameter and height of the sealing. Generally, iron cans are equipped with iron valves, and the outer diameter of the seal is controlled at 27.9mm~28.0mm. The sealing height is controlled within 5.1mm-5.2mm. First loosen the lock nut on the sealing diameter adjusting knob. Turn the adjusting knob counterclockwise to increase the sealing diameter, and turn the adjusting knob clockwise to decrease the sealing diameter. If you need to adjust the sealing height, first loosen the three fastening screws under the sealing head with an inner hexagon. Turn the block to the right to increase the height of the sealing, and turn to the left to reduce the height of the sealing. After adjusting to the required outer diameter and height of the seal, tighten the nut. (Note that when adjusting the sealing diameter, the sealing diameter has a larger value. After this value is adjusted, the sealing diameter will no longer increase, and when sealing, the supporting claw should not extend out of the sealing claw to avoid crushing the valve).