How to solve the dripping problem of the filling machine?

In the production process, the filling machine facilitates filling, improves the production speed, and improves the work efficiency. Some filling machines have some dripping phenomenon, and the dripping phenomenon starts to work, but it will pollute the mechanical equipment for a long time and cause material loss. Bring unnecessary troubles and losses to production, so how to solve and avoid the dripping phenomenon of the filling machine? How do you solve such a problem?

If the filling machine drips, we need to do this:

1. Check the mechanical problems of the filling machine itself, and determine whether the ball valve in the filling machine is damaged or loose. If it is the internal ball valve, the solution is to replace the internal ball valve. If the internal ball valve is damaged, there is no way to repair it, but replace it with a new one.

2. Check whether the syringe assembly is clean. If it is not clean, it will cause an unclean blockage between the inner and outer tubes. Therefore, the syringe must be removed, cleaned, and disinfected and maintained.

3. Check whether the fueling nozzle is complete. If the filling nozzle is damaged, the filling machine will leak during operation. Replace the damaged feed nozzle, check whether other feed nozzles are used, aging or corroded, and replace it as soon as possible.

4. Check whether the O-ring is corroded or worn. If the O-ring is corroded or worn, it will also cause the filling machine to drip. Therefore, in this case, it is recommended to replace the O-ring.

5. Check the position of the barrel. Determine whether the oil cylinder is in the middle support position of the oil cylinder. At the same time, check whether the piston and the piston rod of the oil cylinder are firm. If they are loose, please lock them. If the fault location of the cylinder changes, you need to reinstall the cylinder and confirm that the location is correct.

Although the leakage problem of the filling machine is not big, if the leakage problem is not solved, it may affect the efficiency and quality of our follow-up work. Therefore, it is necessary to pay attention to its leakage problem, repair the problem in time, and then increase the service life of the filling machine, and the quality and quality of the produced product will also be improved.