Views: 0 Author: Site Editor Publish Time: 2021-01-08 Origin: Site
The operating process of the binary spray semi-automatic filling machine is very simple. Because it is a small semi-automatic equipment, there is no complicated process of assembly line, and the operating process is very simple. Ordinary workers can complete the rectification production process without high skills or experience. The operation process is as follows:
1. Check whether the equipment and air source power cord have been connected.
2. Turn on the power switch and turn on the air source switch.
3. Adjust the air source pressure of the main engine and adjust the air compressor pressure to a suitable pressure value.
4. Adjust the height of the sealing machine according to the height of the jar.
5. Adjust the diameter and depth of the seal.
6. Adjust the pressure value of the inflator.
7. Adjust the position of the filling head so that the base of the filling head is 2~5mm away from the valve nozzle.
8. Metering adjustment of filling machine. The metering size of the filling is changed by the stroke of the metering cylinder piston until the required requirement is measured.
9. When the equipment is adjusted, turn on the sealing and inflating switch, and place the empty can with the valve bag under the sealing inflator for filling.
10. Put the filled canister under the filling head and turn on the filling switch to start filling.
11. Fasten the nozzle and cover by hand.
12. After filling, turn off the air source and power supply.