Views:0 Author:Site Editor Publish Time: 2021-03-04 Origin:Site
The maintenance skills of spray filling machine are shared as follows:
1. The spray filling machine must first use the shake handle to turn the machine to check if there is any abnormality in its rotation. If it is normal, then you can drive it. When adjusting the machine, use appropriate tools. It is strictly forbidden to use excessive tools or excessive force to disassemble parts to avoid damage to the machine parts or affect the performance of the machine.
2. When the machine is adjusted, be sure to tighten the loose screws, and use the shake handle to turn the machine to check whether the action meets the requirements before driving. The machine must be kept clean. It is strictly forbidden to have oil stains, liquid chemicals or glass fragments on the machine to avoid damage to the machine. Therefore, it is necessary to remove the liquid chemicals or glass fragments in time during the production process of the machine.
3. All parts of the machine surface should be cleaned once before the shift, and clean lubricating oil should be added to each activity department. It should be scrubbed once a week, especially the areas that are not easily cleaned in normal use or blown with compressed air.
4. After the machine is unpacked, first check whether the random technical information is complete and whether the machine is damaged during transportation, so as to solve it in time. Install and adjust the feeding component and the discharging component according to the outline diagram in this manual. Add new lubricating oil to each lubrication point. Rotate the machine with the crank handle to check whether the machine is running in the correct direction. The machine must be grounded.